Reinke Irrigation System V2 V1.1 fs25-mods

Description:

Reinke Linear Irrigation System Pack Bring realistic linear irrigation to your flatlands! This pack offers realistically priced Reinke linear move irrigation systems—smaller models are budget-friendly, while the larger setups scale accordingly. **Available Widths** You can place the following sizes under the placeables menu: 37 meters (Affordable entry model) 75 meters 115 meters 223 meters **Placement & Terrain Requirements** Flat and Clear Land: Reinke linear systems are designed for flat, obstacle-free terrain. Do not use them on hilly or sloped ground. Clear Path: Ensure there are no trees, utility poles, or obstacles in the field that the machine could collide with during operation. Placement Delay: When placing the main 228-meter pipe and hydrant, expect a short delay of about 6 seconds for it to spawn. (Note: The game may log a warning for these components, but this is entirely normal and does not affect gameplay—everything is 100% functional!) **Pipes & Extensions** If the default 228-meter pipe and hydrant setup is not long enough, you can extend the length using 50-meter pipe add-ons. Towing & Connection: You can tow the pipes easily using a tractor via the 3-point hitch. For the best handling and connection experience, we recommend using the Easy Development Control mod with “Super Strength” turned on. Attaching: Connect the pipes to the Reinke simply by pressing the Q key. Quick Removal Tool: A special pipe wrench tool is included. Clicking on a pipe with it instantly deletes and cleans up the entire connected pipe network for maximum convenience. **Operation & Controls Guide** Water Valve: Open the water valve using the Interactive Control mod before entering the Reinke. Vehicle Switch: Press the G key to switch into vehicle control mode so Interactive Control inputs take effect. Engine Setting: Make sure Automatic Motor Start is set to No (disabled). Power Up: Turn on the Reinke using the Key icon. Interactive Control Panel: Via the panel, you can now activate: - Spraying / Irrigation - Beacon lights - Engine - GPS-like alignment corrector (This aligns the machine straight based on your set angle once cruise control is engaged). **Speed Settings:** Stage 1: 1 km/h Stage 2: 2 km/h **Stopping Procedure (Important!)** Recommended Method: When the Reinke finishes its run, turn off only the engine first. This instantly engages the brakes and holds it securely in place. Alternative (Not Recommended): If you turn off the cruise control/GPS before the engine, the machine will roll backward for a short distance. Always shut down the engine first to park it properly! Pumps and hoses compatibility has been removed; it now includes only my own piping system and the Reinke irrigation unit equipped with a control panel, plus a 228-meter pipe, a 50-meter pipe extension, and a pipe tool that allows you to delete pipes with a single click. Enjoy realistic and efficient crop watering on your flat fields! **V1.1.0.0** - Pump and hose compatibility has been removed. - I only use my own piping system and equipment. - A control panel has been installed on the Reinke irrigation system (specifically the model with 1, 2, 3, and 6 spans); it is located on the right-hand side relative to the direction of travel. - Realistic prices have been set. - With the wrench, which is actually a hose tool, a left-click on the pipe allows you to delete the entire connected piping system in a single click. - It has been integrated such that the valve must be opened using the Interactive Control to operate the Reinke system; therefore, the Interactive Control is required. - Another useful feature is “Easy Developer Control”; by enabling this, you can easily drag the pipes around. **Required mods:** - Easy Development Controls - Interactive Control