Corteva Circular Pivot Irrigation V2.0 fs25-mods

Description:

Corteva Pivot Circular Irrigation Category: Yield Improvements / Sprayers ATTENTION: For proper operation of this mod, carefully read all instructions below. Otherwise, the mod may not function correctly. Take a moment to read thoroughly and enjoy the mod to its fullest. Circular pivot systems irrigate large areas in a circular pattern. They are ideal in regions where water availability is limited. Pivot irrigation offers an efficiency of 85% to 90%. Liquid fertilizers and herbicides can also be applied through the irrigation system. To operate the pivots, I integrated them into a vehicle with a motor, allowing them to function independently without being attached to a motor vehicle. They can also operate without the vehicle being present, provided the automatic start feature is disabled in the vehicle options. Note that vehicles will turn off after 3 minutes if moved more than 300 meters away. Let’s review the features and operation: **Features (Listed in store order):** - Base price: $45,800 - Working widths: 68 meters, 124 meters, 180 meters, and 236 meters - Field contour guides: Yes or No - Coupler configuration: Low coupler (Ball) or Normal coupler (Pin) - Number of sections: 1 (68m radius), 2 (124m radius), 3 (180m radius), or 4 (236m radius) - Rotation and duration options: Full lap, 3/4 lap, 1/2 lap, 1/4 lap; durations of 3, 5, 10, 20, and 30 minutes - Note: Short durations (3 and 5 minutes) cause rapid pivot turns, which may result in hitting at the start and end points. - Color options - Tank capacity: 4000 liters of liquid fertilizer or herbicide - Liquid fertilizer/herbicide consumption: 500 liters per full turn at 30-minute duration **Operation:** - Warnings: The pivot can only be unfolded and folded in its initial position. Never rotate the pivot when it is folded. - Transport the trailer to the desired field. - Note: While the pivot adapts to sloped terrain, it performs best and vibrates less on flat ground. - If guides are enabled in the store, they can be made visible with the left mouse button to assist in placement and field drawing. - Prepare the area by smoothing and removing soil layers to prevent vibrations. - Position the trailer in the desired direction; the pivot deploys backward from the trailer. - Once positioned, uncouple the trailer, approach it, and mount as with a normal vehicle (E key). - Deploy the pivot with the Z key (open cover). More sections make deployment more challenging; wait until the red rotating lights turn off to confirm full deployment. - Fill the tanks with liquid fertilizer or herbicide. - Note: Diesel is not required as there is zero consumption. - After deployment and filling, activate the sprayers with the B key and initiate the turn with the X key. - You can now disembark and let the pivot operate automatically. - The pivot stops at the end of its path, but the sprayers continue running until manually turned off. **V2.0.0.0 Update:** - Fixed an issue where models with 2, 3, and 4 sections could not be filled. This has now been corrected.