Description:

Kverneland 732FT - 7100TBX:

- Many added color configurations.
- Added rear hitch configurations and a rear PTO to the 7100TBX for towing trailers or implements behind the mower.
- Max working speed 18 mph (29 km/h).
- working widths - 3.18 and 10.2 meters.
- Costs:
732FT - $21,000 (estimated slot usage: 8)
7100TBX - $55,000 (estimated slot usage: 13)

Kuhn SW4014 Bale Wrapper:

- Added rear hitch configurations to tow trailers or implements behind the wrapper.
- Added ability to change between auto dropping and manual dropping wrapped bales.
- Added ability to wrap all bale sizes including all types of bales from the FS22_selectableBaleCapacity mod.
- Lots of additional wrap colors added.
- Many different color configurations.

Kubota TE6060 Tedder:

- Working width - 4.4 meters.
- Many different color configurations.
- Max working speed - 18mph (29kph).
- Cost: $7,000
- Added rear hitch configurations to tow trailers or implements behind the tedder.

Kubota RA2076 Windrower:

- Added rear hitch configurations to tow trailers or implements behind the windrower.
- Many different color configurations.
- Max working speed - 18mph (29kph)
- working width - 8.4 meters
- Cost: $19,500

Poettinger Impress 185VC Pro standard and liftable bales:

- Extra wide 4 meter pickup.
- Side doors open and close.
- Silage additive tank available as an extra configuration.
- Rear hitch option for towing trailers to load bales at the same time they are created all in one step saving time.
- Automatically dropping bales can be toggled on and off.
- Color selectable Body, frame, and trim.
- LED strobe lights.
- Can create and wrap bales from 1.25 to 1.80 meters.

CaseIH LB 436 HD standard and liftable bales:

- Rear hitch option for towing trailers to load the bales at the same time they are created all in one step saving time.
- Color selectable Body, frame, and trim.
- LED strobe lights.
- Can create all bale sizes including support for all types of bales from the FS22_selectableBaleCapacity mod.
_________________________________________________

Changelog 1.1.0.2:

- Added ability to make 9x capacity bales to all of the balers.
- Added many more color choices.
_________________________________________________

Changelog 1.1.0.1:

- Fixed issue with the balers where the wheelchocks were always visible in their storage place even when the balers were not connected to a vehicle.
- Fixed the issue that the liftable CaseIH baler would not make liftable bales and adjusted weights of the liftable bales.
- Added additional work modes to the Kverneland 7100TBX to allow the rear 3-Point hitch to be raised or lowered with the different work modes.
- Replaced Claas balers with the Poettinger Impress 185VC Pro. (Details above in the description.)
- Added a 4 meter pickup to the CaseIH LB 436 HD.
- Added configurable strobes and extra colors to the balers.
_________________________________________________

Changelog 1.0.0.1:

- Fixed the issue that the CaseIH LB 436 Liftable baler would not unfold the rear hitch.
- Added silage additive tank configuration to all balers.