Description:

This mod is designed to optimize controller hardware usage with the Moza Farming Control System in mind, but it should also work with similar hardware and peripherals that feature toggle switches. MAIN FEATURE: It offers a shop configuration that enables Hydrostatic drive as an option. Ideal for vehicles like combines or forage harvesters, it allows stop-and-go braking with automatic direction changes, making full use of the throttle control on the FCS controller. In standard mode, these options are disabled for non-hydrostatic vehicles. Additional features: The mod configures toggle switches to behave like true toggle switches. It provides customizable keybindings in the control menu to separate on and off functions—for example, PTO switch: up is on, down is off. This also applies to rotary switches on the FCS. Propulsion and throttle are separated to make the control stick more realistic. The vehicle can be driven at the engine speed you set, rather than adjusting with the propulsion lever. Throttle can be controlled via encoder dials or other keybindings of your choice—twist the knob to increase or decrease, press to hold at idle or reset from a higher RPM. A small HUD displays stick input to help find the true center, along with an indicator showing whether the throttle control is active. Raise and lower commands are split into separate commands. Controls are customizable in the keybind menu. IMPORTANT NOTE: When setting toggle keybindings, selecting the down position may cause the game to register both positions as the same command. For example, if toggle is set to 45 and 46, it will normally register 45, but 46 may register as 45 + 46. After configuring your keybindings, save and quit the game, then restart to correct the dual key issue. The same applies to rotary switch settings—setting from high to low may register as a single control. (To set 34, start with switch on 35 and turn to 34; 33 to 34 results in 33 + 34.) If controls do not work, check for conflicting keybindings. Feel free to suggest command settings you need toggles or support for.