Description:

Tramline Automation for FS25
This is my first script mod for FS25. Since the tramlines from Precision Farming did not always convince me, I created this feature. It automatically integrates into all implements that can be used as seeders.
The HUD can be controlled with the mouse, which can be activated via an assigned key.Set Tramline Distance:
Here you define the working width of the sprayer or fertilizer spreader.
Adjust this either with two assigned keys or by clicking the plus and minus buttons with the mouse.Rhythm:
This displays the number of passes needed for one working width of the sprayer or fertilizer spreader.
In semiautomatic mode, you can adjust the current pass with + and – if needed.
Refer to the help pages now available in the game in the ESC menu for more details.
A half pass should only be done on the second pass.If you are using GPS and a half pass is required, it should look like this:
First pass normal. Starting from the second pass, set an offset of half the working width in the GPS menu. See the description further below under GPS Offset Mode.Mode:
You can change the active working mode of tramline automation either via an assigned key or by clicking on the mode with the mouse.
Pause:
No tramlines will be created. The counter is paused.
Always:
Tramlines are always active when the implement is lowered.
GPS:
Automatic track detection via GIANTS Steering Assist.
A reference track must be set at the start, which can be done using an assigned key.
Semiautomatic:
Counting is done by raising/lowering the implement.
The symbol indicates whether a tramline is currently being created or not.
Enhanced Vehicle GPS: Automatic Lane Detection
This mode is only available when an Enhanced Vehicle GPS course is active.
Adjust the current pass with the plus and minus buttons if it does not match.
Courseplay: This mode is only available if Courseplay is installed.
Please refer to the help page for this!
GPS Offset:
Requirement: GPS mode
Since an even rhythm number requires working with half the working width on the first pass, you can set the offset so the track does not start jumping.
Adjust this value via an assigned key or by clicking the plus and minus buttons next to the rhythm with the mouse.
In GPS mode, these buttons are used to increase or decrease the GPS offset.
Track Width:
Displays the configured tramline track width.
Adjust this with two assigned keys or by clicking the plus and minus buttons with the mouse to match the crop care tractor's track width, as smaller tractors have narrower tracks than larger ones.
Buttons:
Tramline distance +/-: Increase or decrease the tramline distance
CURSOR ON/OFF: Show or hide the mouse pointer
Tramline Mode switch: Switch the tramline mode
GPS reference Lane set: Set the GPS reference track
reference -½ lane or reference +½ lane: Shift the GPS reference track half the working width to the right or left
Track width +/-: Adjust the track width from 1m to 6m
V1.6.0.0
Fix for SKY Agriculture Pack